The metal corrosion of
the cross guide rail accounts for the vast majority, especially in the hot weather, the sweat in the operator's hands will also cause the cross guide rail to rust, so it is recommended not to directly contact the guide rail with hands when using. Body sweat is colorless, transparent or yellowish liquid, with salt content, poor acidity and alkalinity, and pH value of 5~6. In addition to sodium, potassium, calcium and magnesium salts, there is also a little organic matter such as urea solution, lactic acid bacteria and sodium citrate. When the body sweat touches the metal material, it will produce sweat film on the metal material surface. The sweat film will have photoelectric catalytic effect on the metal material and corrode the metal. To avoid rust on the cross guide rail, please wear gloves, finger gloves or common tools when holding the cross guide rail.
At this stage, the cross guide rail will rust, and the main problem of Z is that everyone has not mastered the application of the cross guide rail. Generally speaking, the cross guide rail will be coated with a layer of anti rust oil when leaving the factory. Why does it rust? That's because many people put the guide rail into the warehouse after using it, and then did not take any other safeguard measures. Remind everyone to wipe a layer of anti rust oil on the cross guide rail after use. Don't assume that the processing plant will be lucky if it adds oil. In fact, the antirust oil volatilizes rapidly.
Store in indoor temperature warehouse. It is not necessary to mix with exciting objects, and do not put unnecessary cross rails under the ground. Due to the rapid evaporation of the anti rust oil under the ground, this must be noted. If it is assembled in the internal structure of the facility, it shall be covered with an aluminum alloy frame, and some antirust oil or grease can be wiped on time to prevent the grease from volatilizing. When working for a long time, the contact between the equipment and the guide rail surface will cause friction. The increase of friction resistance is not conducive to the service life of the roller.
If the crisscross guide rail is exposed and in close contact with external gas, dust, etc., It is suggested to maintain frequently and clean once a week. Wipe off the vegetable grease and external dust in the guide rail with a towel, and then apply lubricating grease or vegetable grease after removing the dirt. Be sure to carry out maintenance, so that the cross guide rail can operate with automatic machinery and equipment for a long time.
Try to maintain the surface cleaning of the cross guide rail to prevent the guide rail from rusting. When cleaning, be sure to choose a good cleaning method. According to the surface characteristics of the anti rust treated objects and the standards at that time. After the surface is dry and tidy, it can be compressed and dried with filtered dry air, or dried with drying equipment at 120 ℃~170 ℃, or wiped with clean sand cloth. Z Finally coat the cross guide rail with anti rust oil.
