Lubrication is very important for the smooth sliding of the linear guide slider. We should do a good job in the lubrication of the slider from the following aspects:

1. Add lubricating oil in time during operation. In order to ensure the accuracy and lubrication smoothness of the linear guide slider during operation, we should add lubricating oil in time.

2. How to add lubricant without nozzle? As for the linear guide rail slider without grease nipple, we can directly apply lubricating oil to the contact surface between the slider and the guide rail, and do not put many brands of lubricating oil together.

3. Lubrication before use. Generally speaking, domestic linear guide rail manufacturers will apply antirust oil to the guide rail at the time of delivery, so we must scrub and clean the antirust oil on it and add lubricating oil before initial use. The specific brand of lubricating oil to be used should be in accordance with the manufacturer's instructions and models (don't forget to add lubricating oil to cause wear and rust of the sliding block).

What problems should be paid attention to when using linear guide sliders?

1. During operation, we should keep a certain distance from the sliding block of the linear guide rail (to prevent the sliding block from touching us and causing damage);

2. When using, we must pay special attention to the ambient temperature. Under normal conditions, we should ensure that the linear guide slider is used below 80 degrees Celsius. If the ambient temperature is higher than 80 degrees Celsius, please contact Shengyin transmission for customization before purchasing;

3. When the sliding block of the linear guide rail is used, it is forbidden to disassemble the key parts of the guide rail without permission (when disassembling, it can cause foreign matters to enter, forming problems such as the decline of the guide rail degree and the reduction of the service life);

4. If we want to put the guide rail in a place with bad environment for use, we should install a protective shell for it in advance to prevent the dust and other objects in the environment from entering the interior of the guide rail, and the composition will decrease.

5. Prevent metal chips or clothes from entering the slider to form steel balls and causing damage during operation;

6. Prevent the sliding block from being hit by external forces and accidental fall during operation. Even if the surface looks ok after being hit by external forces, it may be damaged internally.

• How to improve the stability of cross guide rails?2023-09-21

• How to regularly maintain the cross guide rail2023-09-07

• Installation method of linear guide rail2023-08-07

• What are the characteristics of cross rails?2023-08-03

• How to maintain stainless steel ball screw?2023-07-12