Most of the motion along the guide rail system is linear motion, and a few are arc motion. The focus here is on the linear guideway system. Of course, many performance parameters of linear guide rail can be directly applied to arc guide rail.

The linear guideway belongs to the high-density transmission and navigation accessories. When using the equipment, it needs to be very careful, otherwise it will form uneven four sides and lead to the decline of density. If the machine needs to change the guide rail and there is no professional guidance equipment, can the amateur staff finish the equipment process? As for the lack of professional skills, what obvious problems will occur in the equipment linear guide?

If the guide rail is broken, or if you want to improve the dense processing ability of the machine, you can end it by changing the linear guide rail. The problem is, how can you now play the role of Dajia equipment? In fact, as long as the purchased linear guide rail does not disassemble the internal structure, operates according to the equipment requirements, and then tests the flatness of the surrounding area, there will be no problem. However, it is necessary to remind the cleanliness of the plane of the equipment that there can be no dust.

After the linear guide rail of the equipment, some users will find a problem. After using it for a period of time, the scale of the guide rail begins to decline. According to the normal situation, this is due to the performance of the fault. The guide rail products can experience the loss for many years. Why can't the scale be guaranteed suddenly? During this period, there must be problems. According to the experience and analysis of the equipment master for many years, this should be the problem of the balance of the linear guide rail in the equipment.

When installing the equipment, the general operation method is to cover the screws on the four sides first, and tighten them together without any delay. Otherwise, the balance of the linear guide rail will be inclined, which will cause various problems. For example, the scale cannot be guaranteed, and there are some errors. To put an end to this situation, the equipment must be installed according to the correct method.

• Product features of cross ball guide2023-03-13

• Installation skills of cross guide rail2023-02-23

• How to deal with rust of cross rail?2023-02-14

• How to solve the rust problem of cross rail2023-01-05

• Cross guide rail is widely used2022-12-14